NEC NDRV-62 owner manual Moisture Condensation

Troubleshooting (Continued)

Symptom	Cause	Solution
Can’t play a disc	The disc was recorded in Video mode.	Finalize the disc. (page 26)
recorded using this
	Some players will not play even a	No solution.
recorder on another
	finalized disc recorded in Video mode.
player.
	The disc was recorded in VR mode.	The other player must be RW
		compatible in order to play it.
	Discs recorded with copy-once material	No solution.
	cannot be played on other players.
Cannot record or did	The remaining blank space on the disc	Use another disc.
not record successfully.	is insufficient.
	The source you are trying to record is	You cannot record the source.
	copy protected.
	When setting the recording channel, the	Select the channel on the recorder’s
	channel is tuned on the TV’s own tuner.	built-in TV tuner.
	When recording to a Video mode disc,	Use a VR mode formatted disc for
	programs that are copy-once protected	copy-once material.
	cannot be recorded.
Timer recording is not	Clock in Recorder is not set to correct	Set clock to correct time. See “Clock
possible.	time.	Set” on page 20.
	Timer has been programmed	Reprogram Timer. See “Timer
	incorrectly.	Recording” on page 41-42.
	Timer record indicator light does not	Reprogram Timer.
	appear after programming timer.
Stereo Audio Record	TV is not Stereo-compatible.	No solution.
and/or Playback is not
	Broadcast program is not in stereo for-	No solution.
present.
	mat.
	Recorder A/V Out jacks are not con-	Make A/V connections. Stereo is
	nected to TV A/V In jacks.	available only via A/V output from
		Recorder.
	Recorder Audio/Video Out is not select-	Select AUX or A/V source as TV input.
	ed for viewing at the TV.
	Recorder’s TV audio channel is set to	Set TV audio channel mode to Stereo.
	mono.	See page 39.
The remote control	The remote control is not pointed at the	Point the remote control at the remote
does not work properly.	remote sensor of the Recorder.	sensor of the Recorder.
	The remote control is too far from the	Operate the remote control within 7 m.
	Recorder.
	There is an obstacle in the path of the	Remove the obstacle.
	remote control and the Recorder.
	The batteries in the remote control are	Replace the batteries with new ones.
	exhausted.

Moisture Condensation

Moisture condensation can occur:		In locations where moisture condensation may occur:
•	When the Recorder is moved from a cold place to a	•	Keep the Recorder plugged into an AC power outlet
	warm place.		with POWER On. This will help prevent condensation.
		•	When condensation has occurred, wait a few hours
•	Under extremely humid conditions.		for the Recorder to dry before using it.

58