26
Before Operation (Continued)
Finalize
Finalizing ‘fixes’the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen for
navigating the disc.This is accessed by pressing DISC
MENU / LIST or TITLE.
Caution
Once you have finalized a DVD-R and DVD+R disc,
you cannot edit or record anything else on that disc
except DVD+RW.However, you can record and edit a
DVD-RW disc by choosing “Unfinalize”option.
11
Follow steps 1-5 as shown on page 25
(Initialize).
22
Use v/ Vto select the Finalize option.
33
Press Bto move to the third level.
Finalize is highlighted.
44
Press ENTER.
Finalize menu appears.
55
Select OK then press ENTER.
The recorder starts finalizing the disc.
ote
How long finalization takes depends on the type of disc,
how much is recorded on the disc, and the number of
titles on the disc.
ip
If you load a DVD-RW that has already been finalized,
you can ‘unfinalize’it by choosing Unfinalize from the
Finalize menu.After doing this, you can edit and
re-record onto the disc.
Disc Label
Use this to enter a name for the disc.This name
appears when you display disc information on-screen.
•The disc name can be up to 32 characters long.
•For discs formatted on a different Recorder, you will
see only a limited character set.
11
Follow steps 1-5 as shown Initialize on page 25.
22
Use v/ Vto select the Disc Label option.
33
Press Bto move to the third level.
Edit icon is highlighted.
44
Press ENTER.
Keyboard menu appears.
55
Enter a name for the disc. Use vVbBto select
a character then press ENTER to confirm your
selection. Refer step 3 as shown on page 19
(Station Rename).
Remote control buttons for entering a name
N(PLAY):Inser ts a space at the cursor position.
X(PAUSE/STEP):Deletes the after character at the
cursor position.
x(STOP), CLEAR: Deletes the previous character
at the cursor position.
./ >:Moves cursor to left or right.
Numbers (0~9): Enters the character of correspon-
ding location on the selected column.
DISC MENU / LIST,DISPLAY: Switches the key-
board type (English/Latin Capital, English/Latin
Lowercase, Symbols)
66
Choose OK then press ENTER to fix the name
and return to the Setup menu.
77
Press HOME to exit the menu.