NEC NDRV-62 Recording Settings, Area Code, Disc Record Mode, VCR Record Mode, VCR Record System

Before Operation (Continued)

Area Code

Enter the code of a country/area whose standards were used to rate the DVD video disc, referring to the list (See “Area Code List”, page 56.).

1The Home menu appears.Press HOME.

2Use b / B to select the Setup option.

3While the Start option is selected, press ENTER.

4Use v / V to select the Lock option.

5Press B to move to the second level.

6Use v / V to select the Area Code option.

7Press B to move to the third level.

8Enter a 4-digit password using the numbered but- tons to create a personal 4-digit security password. Enter the 4-digit password again to verify.

When you have already entered a password; Enter a 4-digit password using the numbered but-

tons to confirm the personal 4-digit security pass- word.When you have not entered a password yet;

ip

If you make a mistake, press b repeatedly to delete password numbers one by one then correct it.

9 Select the first character using the v / V buttons.

Shift the cursor using B buttons and select the

10 second character using v / V buttons.

Press ENTER to confirm your Area Code selec-

11 tion, then press HOME to exit the menu.

Recording Settings

Disc Record Mode

You can set the picture quality for DVD recording; XP (High Quality), SP (Standard Quality), LP (Low Quality), EP (Extend Quality)

Press HOME.

1 The Home menu appears.

2Use b / B to select the Setup option.

3While the Start option is selected, press ENTER.

4Use v / V to select the Record option.

5Press B to move to the second level.

6 Use v / V to select the Disc Record Mode option.

7Press B to move to the third level.

8 Use v / V to select a desired Record Mode (XP, SP, LP or EP)

9 Press ENTER to confirm your selection, then press HOME to exit the menu.

VCR Record Mode

You can set the picture quality for VCR recording; SP (Standard Play), LP (Long Play)

VCR Record System

Your video recorder uses two colour standards, PAL and MESECAM. During recording your video recorder should select the colour system automatically, however if you experience problems you may need to do it manually.

24