Timer Recording (Continued)

Checking Timer Recording Details

Programming can be checked whenever the Recorder is turned on. Follow steps 1-3 as shown on page 41.

Use v / V to select a timer recording.

Press ENTER to edit the selected program. Timer Record menu appears.

Press CLEAR to delete the selected program from the Timer Record List.

Canceling a Timer Recording

You can clear a timer setting anytime before the record- ing actually starts.

Use v / V to select a program you want to erase on the Timer Recorder List.

Press CLEAR and the confirm message will appear. Press ENTER while the [OK] is selected to erase the recording.

Stopping a Timer Recording in Progress

After a timer recording has started, you can still cancel the program.

Press POWER.

Timer Recording Troubleshooting

Even though the timer is set, the recorder will not record when:

There is no disc (or tape) loaded.

A non-recordable disc (or tape) is loaded.

Disc Protect is set to ON in the Setup menu (see page 27).

Power is turned on.

There are already 99 titles (DVD-RW, DVD-R) or 49 titles (DVD+RW, DVD+R) recorded on the disc.

You cannot enter a timer program when:

A recording is already underway.

The time you’re trying to set has already passed.

There are already 16 timer programs set.

If two or more timer programs overlap:

The earlier program takes priority.

When the earlier program finishes, the later program starts.

If two programs are set to start at exactly the same time, the program entered first takes priority.

If the disc is damaged, the recording may not complete successfully. In this case even though the Check field shows “Rec. OK”, it may not be.

42

Page 42
Image 42
NEC NDRV-62 Checking Timer Recording Details, Canceling a Timer Recording, Stopping a Timer Recording in Progress