
|
|
| Chapter 5 – AT Commands, | ||
V.92 Commands |
|
|
| ||
Command: | +MS= | Modulation Selection |
|
| |
Values: |
| See description. |
|
| |
Defaults: |
| See description. |
|
| |
Description: |
| This | |||
|
| specifies the highest downstream and upstream connection rates using one to four | |||
|
| subparameters. |
|
| |
|
| The command syntax is |
|
| |
|
| +MS=[mod][,[automode][,[0][,[max_rate][,[0][,[max_rx_rate]]]]]]<CR> | |||
|
| Subparameters that are not entered retain their current value. Commas separate optional | |||
|
| subparameters, and must be inserted to skip a subparameter. Example: +MS=,0<CR> | |||
|
| disables automode and keeps all other settings at their current values. | |||
| +MS=? Reports supported options in the format (list of supported mod values),(list of supported | ||||
|
| automode values),(0),(list of supported max_rate values),(0),(list of supported max_rx_rate | |||
|
| values). Example: +MS: (BELL103, V21, BELL212A, V22, V22B, V23C, V32, V32B, V34, | |||
|
| V90, V92), (0, 1), (0), | |||
| +MS? | Reports current options in the format mod, automode, 0, max_rate, 0, max_rx_rate. | |||
|
| Example: +MS: V92, 1, 0, 31200, 0, 56000. | |||
|
| Subparameters |
|
| |
| mod | Specifies the preferred modulation (automode enabled) or the modulation to use in | |||
|
| originating or answering a connection (automode disabled). The default is V92. | |||
|
|
|
|
|
|
|
| mod | Modulation | Possible rates (bps)1 |
|
|
| V922 | V92 | 56000, 54666, 53333, 52000, 50666, 49333, |
|
|
|
|
| 48000, 46666, 45333, 44000, 42666, 41333. |
|
|
|
|
| 40000, 38666, 37333, 36000, 34666, 33333, |
|
|
|
|
| 32000, 30666, 29333, or 28000 |
|
|
| V903 | V.90 | 56000, 54666, 53333, 52000, 50666, 49333, |
|
|
|
|
| 48000, 46666, 45333, 44000, 42666, 41333. |
|
|
|
|
| 40000, 38666, 37333, 36000, 34666, 33333, |
|
|
|
|
| 32000, 30666, 29333, or 28000 |
|
|
| V34 | V.34 | 33600, 31200, 28800, 26400, 24000, |
|
|
|
|
| 21600,19200, 16800, 14400, 12000, 9600, |
|
|
|
|
| 7200, 4800, or 2400 |
|
|
| V32B | V.32bis | 14400, 12000, 9600, 7200, or 4800 |
|
|
| V32 | V.32 | 9600 or 4800 |
|
|
| V22B | V.22bis | 2400 or 1200 |
|
|
| V22 | V.22 | 1200 |
|
|
| V23C | V.23 | 1200 |
|
|
| V21 | V.21 | 300 |
|
|
| Bell212A | Bell 212A | 1200 |
|
|
| Bell103 | Bell 103 | 300 |
|
|
| N o t e s : |
|
|
|
|
| 1. See optional <automode>, <max_rate>, and <max_RX_rate> |
| ||
|
| subparameters. |
|
| |
|
| 2. Selects V.92 modulation as first priority. If a V.92 connection |
| ||
|
| cannot be established, the modem attempts V.90, V.34, V.32bis, etc. |
| ||
|
| 3. Selects V.90 modulation as first priority. If a V.90 connection |
| ||
|
| cannot be established, the modem attempts V.34, V.32bis, etc. |
|
SocketModem Global MT5634SMI Developer’s Guide | 35 |