Technics MT5634SMI-34, MT5634SMI-92 manual AT Commands, S-Registers, and Result Codes

				Chapter 5 – AT Commands, S-Registers, and Result Codes
Command:	#CBF?	Callback Failed Attempts Display
Values:		n/a
Default:		n/a
Description:		Requests the number of failed callback passwords since reset or power-up. This number
		can be stored to nonvolatile memory using the &W command.
Command:	#CBFR	Callback Failed Attempts Reset
Values:		n/a
Default:		n/a
Description:		Resets the number of failed callback passwords to 0. This does not reset the number stored
		in nonvolatile memory.
Command:	#CBIn	Local Callback Inactivity Timer
Values:		n = 1–255
Default:		20
Description:		Sets the time (in minutes) that the modem waits for a command before forcing the user to
		enter the setup password again.
Command:	#CBNy=x		Store Callback Password
Values:		y = 0–29
		x = password
Defaults:		None
Description:		Sets the callback security password for the y memory location. The password must have 6
		to 10 characters, and cannot include the + or - characters.
Command:	#CBPn	Callback Parity
Values:		n = 0, 1, or 2
Default:		0
Description:		Sets parity for the callback security messages.
		#CBP0		No parity.
		#CBP1		Odd parity.
		#CBP2		Even parity.
Command:	#CBRy	Callback Security Reset
Values:		y = 0–29
Default:		None
Description:		Clears the password and phone number in the y memory location.
Command:	#CBSn	Callback Enable/Disable
Values:		n = 0, 1, 2, or 3
Default:		0
Description:		#CBS0		Disables callback security.
		#CBS1		Enables local and remote callback security.
		#CBS2		Enables remote callback security only.
		#CBS3		Disables callback security until local hangup or reset.
Command:	#Pn	Set 11-bit Parity
Values:		n = 0 or 1
Default:		2
Description:		#P0	No parity.
		#P1	Odd parity.
		#P2	Even parity.
Command:	#Sx	Enter Setup Password
Values:		x= password (1–8 characters, case sensitive)
Default:		MTSMODEM
Description:		Enters the callback security setup password.
Command:	#S=x	Store Setup Password
Values:		x= password (1–8 characters, case sensitive)
Default:		MTSMODEM
Description:		Stores a new callback security and remote configuration setup password.

SocketModem Global MT5634SMI Developer’s Guide 39