Technics MT5634SMI-92 From FCC PART 68 Subpart D - Conditions for Registration, Reregistration

Appendix B – Product Approvals, Design Considerations, Regulatory Information

From FCC PART 68 Subpart D – Conditions for Registration

Complete document available from US Government Printing Office:

http://www.access.gpo.gov/cgi-bin/cfrassemble.cgi?title=199847

Section 68.300 Labeling requirements.

(a)Registered terminal equipment and registered protective circuitry shall have prominently displayed on an outside surface the following information in the following format:

Complies With Part 68, FCC Rules

FCC Registration Number: _____________

Ringer Equivalence: ____

(b)Registered terminal equipment and registered protective circuitry shall also have the following identifying information permanently affixed to it.

(1)Grantee’s name.

(2)Model number, as specified in the registration application.

(3)Serial number or date of manufacture.

(4)Country of origin of the equipment: “Made in __________.”

Required if the equipment is not manufactured in the United States. (Country of origin shall be determined in accordance with 19 U.S.C. 1304 and regulations promulgated thereunder.)

(5)As used herein, permanently affixed means that the required nameplate data is etched, engraved, stamped, indelibly printed or otherwise permanently marked. Alternatively, the required information may be permanently marked on a nameplate of metal, plastic, or other material fastened to the enclosure by welding, riveting, or with a permanent adhesive. Such a nameplate must be able to last for the expected lifetime of the equipment and must not be readily detachable.

(6)When the device is so small or for such use that it is not practical to place the statements specified in this section on it, the information required by paragraphs (a) and (b) of this section shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user. The FCC Registration Number and the Model Number shall be displayed on the device.

Reregistration

(From Form 730 Application Guide Appendix C-2) http://www.fcc.gov/formpage.html

Private label distributors may obtain a registration number in their own name. In this case, a reregistration filing is made with the submission of Exhibit B, a copy of a letter from the original registrant to the applicant giving permission for the reregistration and a willingness to provide the applicant with any technical support. The applicant will replace the registration label on the original grantee with the one containing the newly assigned registration number.

SocketModem Global MT5634SMI Developer’s Guide 86