236 Chapter 17—MIDI

MIDI Machine Control

Using MIDI Machine Control (MMC) commands, an MMC-compatible recorder can be controlled from the 01V. [ON] buttons 1 through 6 can be used to control transport functions, while [SEL] buttons 1 through 6 can be used to locate six definable locate points. MMC commands are transmitted via MIDI.

1. Use the [REMOTE] button to locate REMOTE page 2, as shown below.

While this page is displayed, controls other than [ON] buttons 1 through 6 and [SEL] buttons 1 through 6 are disabled.

2.Use the cursor buttons to select the DEVICE No. parameter, and the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons to select a device number.

The device number, which can be set from 1 through 127 or ALL, should be set to match that of the recorder you want to control. When set to ALL, all MMC-compatible recorders connected can be controlled together.

3.Use [ON] buttons 1 through 6 to transmit the following transport com- mands to a recorder.

On Button

Function

MMC Command Value

 

 

 

1

Rewind

05

 

 

 

2

Fast Forward

04

 

 

 

3

Stop

01

 

 

 

4

Play

02

 

 

 

5

Pause

09

 

 

 

6

Record

06

 

 

 

4.Use the cursor buttons and PARAMETER wheel or [–1/DEC] and [+1/INC] buttons to set the locate times in hours, minutes, seconds, and frames.

5.Use [SEL] buttons 1 through 6 to transmit the locate commands to the recorder.

Locate points can be stored using MIDI Bulk Dump. See “Bulk Dump” on page 232 for more information.

01V—Owner’s Manual

Page 246
Image 246
Yamaha 01v owner manual Midi Machine Control, On Button Function MMC Command Value