Yamaha 01v owner manual Faders, Return Controls, Solo Status Indicator

Top Panel Controls 19

put. Normally, [ON] buttons 1 through 8 select channels 1 through 8. When the [OPTION I/O] button is pressed, however, they select input channels 17 through 24, which are only available when an Option I/O card is installed. See “ON Buttons” on page 34 for more information.

The [ON] buttons 1 through 16 and master can be assigned to various internal param- eters on REMOTE page 1, or used as MIDI controllers on REMOTE page 3. See “Assigning Faders & On Buttons” on page 194 and “User Defined MIDI Controllers” on page 238 for more information.

DFaders

Depending on the selected fader mode, the 01V’s 60 mm motorized faders are used to control channel levels, aux send levels, or effects sends levels. Normally, faders 1 through 8 control channels 1 through 8. When the [OPTION I/O] button is pressed, however, they control input channels 17 through 24, which are only available when an Option I/O card is installed. See “Faders (plus Return Rotary Controls)” on page 35 for more information.

Faders 1 through 16 and master can be assigned to various internal parameters on REMOTE page 1, or used as MIDI controllers on REMOTE page 3. See “Assigning Fad- ers & On Buttons” on page 194 and “User Defined MIDI Controllers” on page 238 for more information.

ERETURN Controls

The RETURN controls are used to adjust the effects return levels, and their positions are displayed in the lower-left corner of the display.

FSOLO Status Indicator

The SOLO status indicator lights up when a channel is soloed.

01V—Owner’s Manual