64 Chapter 6—EQ

The EQ can also be adjusted on this page by using the cursor buttons to select param- eters and the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons to set them.

For Effects Returns 1 & 2

1.Use the effects returns [SEL] buttons to select effects returns 1 and 2.

2.Use the [HIGH], [HI-MID], [LO-MID], and [LOW] buttons to select EQ bands, and the F and G controls to adjust the frequency and gain, respec- tively.

If the EQ AUTO SCREEN option is turned on in the preferences (“Setting 01V Prefer- ences” on page 203), the EQ page shown below appears, and the Home fader mode is selected. This page can also be located using the [EQ/ATT] button.

The EQ can also be adjusted on this page by using the cursor buttons to select param- eters and the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons to set them.

For Aux Sends 1–4

1.Use the Fader Mode AUX buttons to select an aux send.

2.Press the MASTER [SEL] button.

3.Use the [HIGH], [HI-MID], [LO-MID], and [LOW] buttons to select EQ bands, and the F and G controls to adjust the frequency and gain, respec- tively.

If the EQ AUTO SCREEN option is turned on in the preferences (“Setting 01V Prefer- ences” on page 203), the EQ page shown below appears, and the Home fader mode is selected. This page can also be located using the [EQ/ATT] button.

The EQ can also be adjusted on this page by using the cursor buttons to select param- eters and the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons to set them.

When aux sends are paired (“Pairing Aux Sends” on page 101), their EQs are linked.

01V—Owner’s Manual

Page 74
Image 74
Yamaha 01v owner manual For Effects Returns 1, For Aux Sends