Yamaha 01v owner manual Monitor Outputs, Phones, Two-track Input 2TR

Monitor Outputs 77

Monitor Outputs

Monitor and solo signals are output via the monitor out and phones connections. Make sure the MONITOR–2TR IN switch is set to MONITOR for monitoring. See “Two-track Input (2TR IN)” on page 77 for more information.

Monitor signals are converted to analog using 18-bit 8-times oversampling D/A converters, and then output via balanced 1/4-inch phone jacks with a +4 dB nominal output level.

The MONITOR OUT LEVEL control is used to adjust the level of the monitor out signal.

Phones

A pair of stereo headphones can be connected to the PHONES stereo (TRS) phone jack. The phones signal is the same as the monitor out signal.

The PHONES LEVEL control is used to adjust the level of the phones signal.

MONITOR OUT

+4dB(BAL)

R L

010

LEVEL

MONITOR

OUT

PHONES

010

LEVEL

PHONES

Two-track Input (2TR IN)

Signals connected via the 2TR IN jacks can be monitored via the MONITOR OUT and PHONES when the MONITOR–2TR IN switch is set to 2TR IN. The stereo outputs of a master recorder can be connected here for confidence monitoring and master playback. The 2TR IN uses phono jacks with a –10 dBV nominal input level.

By setting the 15/16–2TR IN switch to 2TR IN, 2TR IN signals can be fed to input channels 15 and 16 for mixing with other sig- nals. Normally, the input signals for these input channels are derived from phone jack inputs 15 and 16.

The 2TR OUT jacks are explained on page 88.

–10dBV (UNBAL)

L

R

IN OUT

2TR

MONITOR

2TR IN

15/16 2TR IN

01V—Owner’s Manual