Yamaha 01v owner manual On Buttons, Input Channel on button Examples, Master on Button Examples

34 Chapter 4—Getting Around the User Interface

ON Buttons

The [ON] buttons are used to turn channels on or off. They work with the following channels:

•CH1 through CH24—Input channels 1 through 24

•ST—Stereo output

•RTN1, RTN2—Effects returns 1 and 2

•AUX1 through AUX4—Aux sends 1 through 4

•EFF1, EFF2—Effects sends 1 and 2

The bus outs can be turned on or off on PAN/ROUT page 4.

			ON button
Fader Mode
	1–8	9–12	13/14	STEREO	RETURN 1/2
	[17–24]		15/16	[MASTER]
HOME				STEREO OUT
				On/Off
AUX 1				AUX 1
				master On/Off
AUX 2				AUX 2
				master On/Off
AUX 3	CH 1–16 On/Off			AUX 3
				master On/Off	RETURN 1/2
AUX 4				AUX 4	On/Off
				master On/Off
EFFECT 1				EFFECT 1
				master On/Off
EFFECT 2				EFFECT 2
				master On/Off
OPTION I/O	CH 17–24*1	—	—	STEREO OUT
	On/Off			On/Off
REMOTE 1		Assigned internal parameters			—
REMOTE 2	MMC (1–6)			—
REMOTE 3		User defined MIDI controllers			—

*1. CH17–20 with four-input Option I/O cards.

On buttons 1 through 16 and master can be assigned to various internal parameters on REMOTE page 1, or used as MIDI controllers on REMOTE page 3. See “Assigning Fad- ers & On Buttons” on page 194 and “User Defined MIDI Controllers” on page 238 for more information.

Input Channel [ON] button Examples

To turn on or off input channel 3, press the [HOME] button, and then press [ON] but- ton 3. (If a fader mode other than Option I/O or Remote is selected, it’s not necessary to press the [HOME] button.)

To turn on or off input channels 13/14, press the [HOME] button, and then press [ON] button 13/14. (If a fader mode other than Option I/O or Remote is selected, it’s not nec- essary to press the [HOME] button.)

To turn on or off input channel 20, press the [OPTION I/O] button, and then press [ON] button 20.

Master [ON] Button Examples

To turn on or off the stereo output, press the [HOME] button, and then use the MAS- TER [ON] button.

01V—Owner’s Manual