Key Feature Discussion
5
01V—Owner’s Manual
01V Sonic Performance
The 01V’s linear 20-bit 128-times oversampling A/D converters pr o vide a typical
dynamic range of 105 dB. The STEREO OUT features 20-bit 8-times oversampling
D/A converters, while the MONITOR OUT and OMNI OUTs feature 18-bit 8-times
oversampling D/A converters. Oversampling techniques effectively incr ease the int er-
nal sampling rate, so side effects caused by steep low-pass filters, used to filter out sam-
pling frequency components during D/A conversion, are virtually eliminated.
Consequently, audio signal integrity is maintained from input through to output.
The 01V can generate the industry standard sampling rate of 44.1 kHz, or synchronize
to an external wordclock source from 44.1 kHz –10% to 48 kHz +6%.
Four-band Parametric EQ & Library
Input channels 1 through 16, the stereo output, aux sends, and effects returns all feature
four-band fully parametric EQ, with variable gain, frequency, Q, and b ypass. I nput
channels 17 through 24 feature a simplified two-band parametric EQ. High and low EQ
bands can be used as shelving, peaking, or HPF and LPF, respectively. See “EQ” on page
61 for more information.
EQ settings can be stored in the EQ library as programs, or with all mix settings in mix
scenes. The EQ library consists of 40 preset programs and 40 user programs. User pro-
grams allow you to store frequently used EQ settings, which can be titled for easy iden-
tification. The unique collection of preset EQ programs are designed for specific
applications and instruments, and provide a good reference and starting point when
making EQ adjustments. See “EQ Library” on page 67 for more information.
Motorized Faders
The 01V features 15 motorized 60 mm faders that move automatically when a mix
scene is recalled, providing a clear and visual indication of fader levels. A fade time of
up to 25 seconds can be set for each mix scene individually. Faders can be grouped
together in one of three fader groups for multiple fader control. See “Grouping Faders ”
on page 55 for more information. Faders on paired channels move simultaneously. See
“Pairing Input Channels” on page 52 for more information.
01V Faders are multifunction controls, and their exact operation depends on the
selected Fader mode. Input channel faders may be used as channel faders or aux or
effects send controls. The STEREO fader may be used as the stereo output fader or aux
or effects send master level faders. See “Fader Modes” on page 32 for more information.
Faders 1 through 16 and master can be assigned to various internal parameters on
REMOTE page 1, or used as MIDI controllers on REMOTE page 3. See “Assigning Fad-
ers & On Buttons” on page 194 and “User Defined MIDI Controllers ” on page 238 for
more information.