Yamaha Understanding v-aux and Post-Fader Aux Sends in the 01V Manual

Pre-fader/Post-fader Aux Sends 97

Pre-fader/Post-fader Aux Sends

The aux sends on input channels 1 through 24 and the effects returns can be configured individually as pre-fader or post-fader sends. Pre-fader means that signals are sourced before, and are not affected by the regular channel fader. Post-fader means that signals are sourced after, and are affected by the regular channel fader. With a post-fader send, the regular channel fader can be used to control the channel level and the aux send level simultaneously.

For Input Channels 1–16 & the Effects Returns

1. Use the [AUX] buttons to locate an AUX PRE/POST page, as shown below.

The value below each PRE/POST switch indicates the position of the aux send fader. The position of the corresponding aux send master fader is displayed at the top of the page.

2.Use the [SEL] buttons or cursor buttons to select the PRE/POST switches, and the [ENTER] button, PARAMETER wheel, or [–1/DEC] and [+1/INC] buttons to set them.

The PRE/POST switches on input channels 13 and 14 (likewise 15 and 16) are perma- nently linked. When input channels 1 through 12 are paired, or when aux sends are configured as stereo pairs (“Pairing Input Channels” on page 52), their PRE/POST switches are linked.

For Input Channels 17–24

1. Use the [OPTION I/O] button to locate OPTION page 2, as shown below.

2.Use [SEL] buttons 17 through 24 to select channels.

3.Use the cursor buttons to select the AUX PRE/POST switches, and the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons to set them.

When aux 1 and 2 are paired (“Pairing Aux Sends” on page 101), the PRE/POST switches are linked.

01V—Owner’s Manual