Yamaha 01v owner manual Delay+Rev, Delay and reverb effects in parallel

154 Chapter 12—Effects

DELAY+REV

Delay and reverb effects in parallel.

Parameter	Range	Description
DELAY L	0.0–1000.0 ms	Left channel delay time
NOTE L	*1	Used in conjunction with TEMPO to determine left
		channel DELAY L
FB.GAIN	–99 to +99%	Feedback gain (plus values for normal-phase
		feedback, minus values for reverse-phase feedback)
DELAY R	0.0–1000.0 ms	Right channel delay time
NOTE R	*1	Used in conjunction with TEMPO to determine right
		channel DELAY R
DLY HI	0.1–1.0	Delay high-frequency feedback ratio
FB.DLY	0.0–1000.0 ms	Feedback delay time
NOTE FB	*1	Used in conjunction with TEMPO to determine
		FB.DLY
DLY/REV	0–100%	Delay and reverb balance (0% = reverb, 100% =
		delay)
REV TIME	0.3–99.9 s	Reverb time
INI.DLY	0.0–500.0 ms	Initial delay before reverb begins
REV HI	0.1–1.0	High-frequency reverb time ratio
DENSITY	0–100%	Reverb density
HPF	Thru, 21 Hz–8.0 kHz	High-pass filter cutoff frequency
LPF	50 Hz–16.0 kHz, Thru	Low-pass filter cutoff frequency
TEMPO*2	25–300 bps	Used in conjunction with NOTE parameters to
		determine DELAY L, DELAY R, and FB.DLY
1.		(Maximum value depends on
the tempo setting)

2.For more information about the DELAY, NOTE, and TEMPO parameters, see “Setting Delay, Freq, Note & Tempo Parameters” on page 137.

01V—Owner’s Manual