Yamaha 01v owner manual 256

256	Troubleshooting
	Symptom	Advice
Fader movements are inconsistent.		Try calibrating the faders. See “Calibrating the Faders” on page 204
		for more information.
		This warning message appears if digital signals from the Digital Stereo
DIGITAL IN Sync Error message		Coaxial In or Option I/O inputs are not wordclock synchronized with
		the 01V. Make sure that all digital equipment is wordclock synchro-
appears.
		nized to a common wordclock source. See “Setting the Wordclock”
		on page 209 for more information.
UNLOCK appears in the Fs window		Make sure the external wordclock source is turned on and that the
		cable carrying the wordclock signal has not been disconnected. See
of SETUP page 1.
		“Setting the Wordclock” on page 209 for more information.
Cannot transmit or receive MIDI		On MIDI page 1, check the following settings: PORT, Tx CH, Rx CH,
		and the Tx and Rx switches for Program Change, Control Change,
messages.
		etc. See “MIDI Setup” on page 224 for more information.
		Make sure that the 01V is configured to receive Program Change mes-
		sages and that the MIDI Channels of the 01V and transmitting device
		match. See “MIDI Setup” on page 224 for more information.
MIDI Program Change messages		Perhaps the Program Change being transmitted is not assigned to an
		01V scene memory? Check the mix scene to Program Change assign-
don’t recall mix scenes.
		ment table. See “Program Change Scene Recall” on page 227 for
		more information.
		If the scene memory assigned to the received Program Change con-
		tains no data, it cannot be recalled.
		Make sure that the 01V is configured to receive Control Change mes-
		sages and that the MIDI Channels of the 01V and transmitting device
MIDI Control Change messages		match. See “MIDI Setup” on page 224 for more information.
		Perhaps the Control Change being transmitted is not assigned to an
don’t control mix parameters.
		01V parameter? Check the parameter to Control Change assignment
		table. See “Control Change Parameter Control” on page 229 for more
		information.
Cannot receive MIDI Bulk Dump		Make sure that the BULK Rx switch on MIDI page 1 is turned on. See
data.		“MIDI Setup” on page 224 for more information.
Controls have no effect on the 01V.		Perhaps the Local Control function on MIDI page 5 is turned off? See
		“Local Control” on page 234 for more information.
MMC commands have no effect.		Make sure the device number matches that of the MMC-compatible
		recorder. See “MIDI Machine Control” on page 236 for more informa-
		tion.

01V—Owner’s Manual