Yamaha 01v owner manual Main Stereo Meters, Peak Hold

84 Chapter 7—Solo, Monitors & Meters

Omni Outs

HOME page 3 displays signal level meters for the four omni outs. The source assigned to an omni out is displayed below its meters. These assignments are made on PAN/ROUT page 4. See “Assigning Omni Outs” on page 116 for more information.

Stereo Output

HOME page 4 displays signal level meters for the stereo output. Compared to the main stereo meters, these have a large scale from –72 dB to CLIP.

Meters for the stereo output also appear on the VIEW pages. See “Viewing Stereo Out- put Settings” on page 89 for more information.

Main Stereo Meters

L STEREO R

CLIP

–3

–6

–9

–12

–15

–18

–24

–30

–36

–42

–48

In addition to the meters on HOME page 4, stereo output levels are displayed on the dedicated 12-segment main stereo meters, with Peak Hold. The meters range from –48 dB to CLIP. If a CLIP LED does light, reduce the stereo output level to prevent signal distor- tion. The main stereo meters are not affected by the metering points on HOME page 5.

Peak Hold

The Peak Hold function works with the HOME, OPTION I/O, and main stereo meters. When it’s turned on, the meter segments lit by the loudest signal peaks remain on, pro- viding an easy way to check for peak levels.

1.Use the PARAMETER wheel, [–1/DEC] and [+1/INC] buttons, or [ENTER] button to turn the Peak Hold function on or off.

To reset the Peak Hold function, turn it off and then on again.

01V—Owner’s Manual