Masterpage:Right+
EN 63
Filename [DX5SUS_12Editing.fm]
EDITING
Page 63 Thursday, 1 September 2005 14:35
You can use your unit as the source player or as the recording
deck.
1Make connections.
AWhen using your unit as the source player:
^connect its [S-VIDEO/VIDEO/AUDIO OUTPUT] connectors
to the input connectors on another recorder.
BWhen using your unit as the recording deck:
^connect its [S-VIDEO/VIDEO/AUDIO INPUT] connectors on
the front or rear panel to the output connectors on another
recorder.
When connecting to another recorder with S-video connector,
set AREAR AUX L-1B or AFRONT AUX F-1B to AS-VIDEOB.
2Press CH +/– to select the external input.
Select AF-1B when the source player is connected to the unit’s
[VIDEO/AUDIO] or [S-VIDEO/AUDIO] input connectors on the
front panel, and select AL-1B when it is connected to the unit’s
[VIDEO/AUDIO] or [S-VIDEO/AUDIO] input connectors on the
rear panel.
3Press REC MODE repeatedly to set the recording mode. For
DV deck, press REC MODE on the remote control to set the
recording mode.
4Engage the Play mode on the source player.
5Engage the Record mode on the recording deck.
6Stop recording on the recording deck, then stop playback on the
source player.
NOTES:
All necessary cables can be obtained from your dealer.
When you use this unit as the source player for editing, be sure to
set ASUPERIMPOSEB to AOFFB before starting. (Apg. 72)

Edit To Or From Another Recorder

NOTES:
When using another recorder as the recording deck, refer to its
instruction manual.
It is not possible to dub copy-protected contents. An error
message will appear on the TV screen.
AWhen using your unit as the source player
BWhen using your unit as the recording deck
Recorder
Your unit
Another recorder
Player
TV
Recorder
Your unit
Another recorder
Player
TV
Slide the TV/CABLE/DBS/DVD switch to DVD.
DX5SUS_00.book Page 63 Thursday, September 1, 2005 2:35 PM