Filename [DX5SUS_13Subsidiary.fm]
Masterpage:Left+
76 EN SUBSIDIARY SETTINGS
Page 76Thursday, 1 September 2005 14:35
If you connect the unit and TV with Component Video Connection
(Apg. 18), you can select the scan mode from two modes:
Interlaced scan mode which is used in the conventional TV
system, and Progressive scan mode which enables reproduction of
higher-quality images.

8Interlaced scan

In the conventional video system, a picture is shown on the display
monitor in two halves. The Interlaced scan system places lines of
the second half of the picture in-between lines of the first half of the
picture.

8Progressive scan

Progressive scan displays all the horizontal lines of a picture at one
time, as a single frame. This system can convert the interlaced
video from DVD into progressive format for connection to a
progressive display. It dramatically increases the vertical
resolution.
1Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2Press PROGRESSIVE SCAN for 3 or more seconds.
●Video output indicator (q) lights on the front display panel if
Progressive scan mode has been established. (Apg. 14)
●Each press of PROGRESSIVE SCAN for 3 or more seconds
switches the scan mode.
NOTES:
●Interlaced scan mode is the setting at your purchase.
●Interlaced scan mode might be suitable depending on video
material.
●Scan mode cannot be set while menu screen is displayed.
●When the Progressive scan mode is engaged, no video signal is
output from [S-VIDEO OUTPUT] connector and [VIDEO/AUDIO
OUTPUT] connectors.
You can lock the disc tray to prohibit the unwanted disc ejection by
children.
To lock tray
While the unit is turned off, press and hold o, then press M on the
unit. ALOCKB appears on the front display panel and the disc tray is
locked.
To unlock tray
While the unit is turned off, press and hold o, then press M on the
unit. AUNLOCKB appears on the front display panel.
You can disable the operations of this unit using the Child Lock
function.
1When the unit is turned on, press and hold DVD A on the
remote control for more than 10 seconds.
●The unit turns off and enters into Child Lock mode.
●When in Child Lock mode, ACLB will appear on the front display
panel indicating that Child Lock mode is engaged when an
attempt was made to operate buttons on the unit or remote
control.
2Press and hold DVD A on the remote control for more than 10
seconds.
●Child Lock is released and the unit turns on.
NOTE:
Timer recording will be performed even if Child Lock is activated.

Scan Mode Set (HDD & DVD Deck Only)

ATTENTION:
Your TV needs to be compatible with Progressive.
●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/CABLE/DBS/DVD switch to DVD.
PROGRESSIVE SCAN
DVD
HDD
CABLE/DBS
DVDTV

Tray Lock (DVD Deck Only)

●Turn off the unit.

Child Lock

●Turn on the unit.
o
M
DX5SUS_00.book Page 76 Thursday, September 1, 2005 2:35 PM