Filename [DX5SUS_13Subsidiary.fm]
Masterpage:Left+

72 EN SUBSIDIARY SETTINGS

Page 72Thursday, 1 September 2005 14:35

8JUMP TIME ^ 15 MIN / 30 MIN / 1 HR

You can locate a scene ahead of or behind the currently viewed
one by jumping a selected time interval during playback (or Live
Memory Playback). For details, refer to AJump SearchB (Apg. 26,
40).

DISPLAY SET

8SUPERIMPOSE ^ AUTO / OFF

When this function is set to AAUTOB, various operational indicators
appear on the TV screen. Messages appear in the selected
language. (Apg. 20)
AUTO:
To superimpose operational indications for approximately five
seconds just after the corresponding operation.
OFF:
To turn off superimposed indications.
NOTES:
●When you use this unit as the source player for editing, be sure to
set ASUPERIMPOSEB to AOFFB before starting. (Apg. 63)
●When you select AAUTOB, during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.

8BLUE BACK ^ OFF / ON

When this function is set to AONB, the TV screen becomes all blue
when receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals,
set this function to AOFFB.

8DIMMER ^ BRIGHT / DIMMED

You can change the brightness of the front display panel.
BRIGHT:
Normally select this.
DIMMED:
To dim the front display panel. (Blue lamp on the front display
panel is turned off.)

8POWER SAVE ^ OFF / ON

When this function is set to AONB, you can reduce the power
consumption while the unit is turned off.
NOTES:
●During Power Save mode ^
^the front display panel will be turned off.
●Power Save does not work when ^
^the unit is in the Timer mode.
●It takes some time for the unit to complete initialization after you
turn on the unit power, with AWAKE UPB blinking on the front
display panel.

8ON SCREEN LANGUAGE

This unit offers you the choice to view on-screen messages in 3
different languages.
For details, refer to AOn-screen Language SetB (Apg. 20).

VIDEO IN/OUT

8MONITOR TYPE ^ 4:3LB / 4:3PS / 16:9AUTO / 16:9FIX

You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs.
For details, refer to AMonitor SetB (Apg. 23).

8FRONT AUX F-1 ^ VIDEO / S-VIDEO

Select the appropriate mode depending on the connector (F-1)
being used on the front panel.
VIDEO:
To use the [VIDEO] input connector on the front panel.

S-VIDEO:

To use the [S-VIDEO] input connector on the front panel.

8REAR AUX L-1 ^ VIDEO / S-VIDEO

Select the appropriate mode depending on the connector (L-1)
being used on the rear panel.
VIDEO:
To use the [VIDEO INPUT] connector on the rear panel.

S-VIDEO:

To use the [S-VIDEO INPUT] connector on the rear panel.
DX5SUS_00.book Page 72 Thursday, September 1, 2005 2:35 PM