Filename [DX5SUS_07HDD Operation.fm]
Masterpage:Left+

38 EN BASIC OPERATIONS ON HDD DECK

Page 38 Thursday, 1 September 2005 14:35

Instant Timer Recording (ITR)

This easy method lets you record for 30 minutes to 6 hours
(selectable in 30-minute intervals), and shuts the unit off after
recording is finished.
1Press R on the unit to start recording.
2Press R again to engage the ITR mode.
On the front display panel, A0:30B appears.
3If you want to record for more than 30 minutes, press R to
extend the time. Each press extends recording time by 30
minutes.
NOTES:
You can only perform ITR using the R button on the unit.
ITR is not possible during timer recording.
When the recording capacity becomes full during timer recording
or Instant Timer Recording, the unit is automatically shut off.

Watch Another Program While Recording On The Unit

While recording is going on, you can watch another program on the
TV. It does not interfere with recording.
1Turn on the TV.
2Select the desired channel to watch on the TV using your TV’s
remote control.

Elapsed Recording Time And Disc Remaining Time

Indication

During recording, press DISPLAY repeatedly until the desired
indication appears on the front display panel.
Each time you press DISPLAY, the time indication changes as
follows:
Elapsed recording time N Disc remaining time N Clock N (Back
to the beginning)
You can also check the disc remaining time by pressing REMAIN
while the unit is stopped or recording is in progress. The list of
disc remaining times for all recording modes appears on the TV
screen.

Second Audio Recording

This unit’s built-in MTS decoder enables reception of Multichannel
TV Sound broadcast. To record a SAP program received, set A2ND
AUDIO RECORDB to AONB. (Apg. 71)
NOTES:
When the channel is changed on the unit;
The AMONOB indicator appears on the screen for about 5
seconds if the program is a monaural broadcast.
The ASTEREOB indicator appears on the screen for about 5
seconds if the program is a stereo broadcast.
Both ASTEREOB and ASAPB indicators appear when a stereo
program is accompanied by SAP sound.
Both AMONOB and ASAPB indicators appear when the main audio
on the monaural broadcast is accompanied by SAP sound.

Recording Features

Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/DBS/DVD switch to DVD.
Press DV/HDD/DVD SELECT on the unit repeatedly or HDD
on the remote so that the HDD lamp lights up on the unit.
REMAIN DISPLAY
HDD
CABLE/DBS
DVDTV
R
DV/HDD/DVD
SELECT
HDD lamp
DX5SUS_00.book Page 38 Thursday, September 1, 2005 2:35 PM