Filename [DX5SUS_10Timer Recording.fm]
Masterpage:Left0
46 EN
Page 46Thursday, 1 September 2005 14:35
TIMER RECORDING ON HDD/DVD DECK
You can program this unit to timer record as many as 32 programs.
With the VCR Plus+ system, timer programming is greatly
simplified because each TV program has a corresponding code
number which your unit is able to recognize.
You can use the remote control to enter the PlusCode number.
1Load a recordable disc if recording to DVD.
2Press PROG to access the program top screen.
3Press selection keys to select AVCR Plus+ PR.B, then press
ENTER.
●When APROGRAM FULL DELETE UNWANTED TIMER
PROGRAMSB appears on the TV screen, you need to cancel
some of the reserved programs. (Apg. 49)
4Press the number keys to
enter the PlusCode number of
a program you wish to record.
OR
Press selection keys to select
the desired number key on the
screen, then press ENTER.
Repeat to enter all required
numbers.
●If you have made a mistake, press selection keys to select
ADELETEB or ADELETE ALLB, then press ENTER and input the
correct number before you press ENTER again.
5Press selection keys to select ARECORD TOB, then press
ENTER. Press selection keys to select the desired recording
deck, then press ENTER.
6Press selection keys to select ACONFIRMB, then press
ENTER.
●If the number you entered is invalid, APLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRYB appears on the TV
screen. Input a valid PlusCode number.
●If AGUIDE PROGRAM IS NOT SET SET GUIDE PROGRAM
THEN RETRYB appears on the TV screen, set Guide Channel
Numbers manually. (Apg. 73)
7The PlusCode number you entered and the matching timer
recording information are displayed on the TV screen. Check
the program data.
●To cancel this setting, press RETURN.
8Press selection keys to select the desired recording option as
required. Press selection keys to select the desired setting,
then press ENTER.
●AINPUT NAMEB (Apg. 51, AModify Title NameB)
●ACATEGORYB (Apg. 52, AModify CategoryB)
●AWEEKLY/DAILYB (Apg. 47, AWeekly/Daily RecordingB)
●AREC MODEB (Apg. 34, ARecording ModeB)
9Press selection keys to select AOKB, then press ENTER to
access the Program Confirmation screen.
10 Press selection keys to select AEXITB, then press ENTER to
complete timer programming.
●To program another timer, press DE to select ACONTINUEB,
then press ENTER.
●If APROGRAM OVERLAPPEDB appears on the TV screen,
delete or modify the programs.
NOTES:
●There may be cases that the VCR Plus+ Timer Programming
function prolongs the stop time of the programming.
●When two successive programs are recorded on a DVD-RW disc
with the VCR Plus+ Timer Programming function, the beginning
of the second one may be left off the recording.
●If the copy limited program is received during timer recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you
programmed.

VCR Plus+ Timer Programming

●Make sure that the unit’s built-in clock is set properly.
●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/CABLE/DBS/DVD switch to DVD.
PROG
DISPLAY
0 – 9
RETURN
FGDE
ENTER
CABLE/DBS
DVDTV
Selection Keys
PLUS CODE NO.
1234
12
456
789
0
3
1
2
3
1
2
2
3
ENTER
SELECT
PROG
EXIT
PROGRAM > VCR Plus+ PR. (1/2)
PRESS [PROG] TO EXIT
SELECT WITH @
THEN PRESS [ENTER]
RECORD TO DVD
CONFIRM
DELETE
DELETE ALL
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see AChanging VCR Plus+ SettingB (Apg. 73)
and set the Guide Channel number correctly.
IMPORTANT:
If you have moved to a different area or if a broadcasting
station’s channel number has been changed, the wrong channel
number will be displayed on the VCR Plus+ program screen in
step 7. When this happens, set the correct Guide Channel
number for that station. (Apg. 73, AChanging VCR Plus+
SettingB)
DX5SUS_00.book Page 46 Thursday, September 1, 2005 2:35 PM