Genicom GEK 00031B manual Final when used in a Select Character Set SCS sequence

DECAUPSS	Assign User Preference Supplemental Set: Assigns a particular
	character set to the User Preference Supplemental set. This becomes
	the character set designated by the User Preference character set
	final when used in a Select Character Set (SCS) sequence.
	Source: Print manager	Destination: Levels 1, 2, 3
	Format

DCS Ps U D ... D ST

Description

Ps indicates whether the User Preference set is a 94-character or a

96-character set:

Ps

0

1

Meaning

94-character set

96-character set

D ... D is a string containing the intermediate and final characters of the designating sequence used to explicitly select the supplemental character set. See SCS in this chapter for a list of intermediate and final characters.

To assign DEC Supplemental as the User Preference character set, use the following DECAUPSS command:

DCS 0 ! u %5 ST

To assign ISO Latin-1 Supplemental as the User Preference set, use the following DECAUPSS command:

DCS 1 ! u A ST

To use the User Preference set, see User Preference under SCS. The supported character sets are as follows:

▪DEC Supplemental (Ps must equal 0)

▪ISO Latin-1 Supplemental (Ps must equal 1)

▪DEC Hebrew Supplemental (Ps must equal 0)

▪ISO Latin-Hebrew Supplemental (Ps must equal 1)

▪DEC Technical (Ps must equal 0)

▪Hebrew 7-bit (Ps must equal 0)

GEK-00029B 213 5000 Series Programmer’s Manual