Genicom GEK 00031B manual Decshorp, Select Horizontal Pitch, Decverp, Select Vertical Pitch

DECSHORP	Set Horizontal Pitch: This sequence will set the number of
	characters printed per horizontal inch on a line. In addition to
	changing character size, this sequence will reset the left and right
	margins and will retain the current horizontal tab settings. Ps selects
	the horizontal pitch as defined in the following chart.
	General Command Syntax
	ESC [ Ps w
			Select Horizontal Pitch
		Ps	Horizontal Pitch
		0	10 characters per inch
		1	10 characters per inch
		2	12 characters per inch
		3	13.3 characters per inch
		4	16.7 characters per inch
		5	5 characters per inch
		6	6 characters per inch
		7	6.6 characters per inch
		8	8.25 characters per inch
		9	15 characters per inch

	Decimal:	27 71		Ps 91
	Hex :	1B 5B Ps 77
	BASIC:	CHR$(27);”[“;Ps;”w”;
DECVERP	Set Vertical Pitch: This sequence will set the number of lines per
	inch on the page. Ps selects the vertical pitch as defined in the
	following chart.
	General Command Syntax
	ESC [ Ps z
					Select Vertical Pitch
			Ps		Vertical Pitch
			0		6 lines per inch
			1		6 lines per inch
			2		8 lines per inch
			3		12 lines per inch
			4		2 lines per inch
			5		3 lines per inch
			6		4 lines per inch
			10		6 lines per inch
			11		6 lines per inch

Indeterminate Conditions

No parameter will result in a default of 6 LPI. Values not listed are ignored.

Decimal:	27 71 Ps 94
Hex:	1B 5B Ps 7A
BASIC:	CHR$(27);”[“;Ps;”z”;

Chapter 7. Dec LG/Compaq LG Plus Emulation 192 GEK-00029B