Genicom GEK 00031B manual SS2, SS3, Dcs

RI	Reverse Index: Moves the active line position up to the same position
	on the preceding line. The Reverse Index command causes the active
	position to stop at the top of the margin.
	Decimal:	27 78 or 141
	Hex:	1B 4D or 8D
	BASIC:	CHR$(27);CHR$(78); or CHR$(141);
SS2	Single Shift 2: Temporarily moves character set G2 into GL to print
	one character.
	Decimal:	27 69 or 142
	Hex:	1B 4E or 8E
	BASIC:	CHR$(27);"N"
SS3	Single Shift 3: Temporarily moves character set G3 into GL to print
	one character.
	Decimal:	27 70
	Hex:	1B 4F or 8F
	BASIC:	CHR$(27);"O"; or CHR$(143);
DCS	Device Control String: Introduces a device control string.
	Indeterminate Conditions
	A DCS control character received in an escape sequence, control
	sequence, or control string aborts the sequence and begins a new
	device control string.
	Decimal:	27 80 or 144
	Hex:	1B 50 or 90
	BASIC:	CHR$(27);"P"; or CHR$(144);
CSI	Control String Introducer: Introduces a sequence of one or more
	bytes that constitute a control function.
	Decimal:	27 91 or 155
	Hex:	1B 5B or 9B
	BASIC:	CHR$(27);CHR$(91); or CHR$(155);
	Indeterminate Conditions
	A CSI control character received in an escape, control sequence, or
	control string aborts the sequence and begins a new device control
	string.
ST	String Terminator: Indicates the end of a device control string (DCS).
	Decimal:	27 92 or 156
	Hex:	1B 5C or 9C
	BASIC:	CHR$(27);CHR$(92); or CHR$(156);

Chapter 7. Dec LG/Compaq LG Plus Emulation 160 GEK-00029B