Genicom GEK 00031B manual Decaupss, Decbarc

DECAUPSS	Assign User Preference Supplemental Set: Assigns several of the
	ISO and special character sets to the User Preference Supplemental
	Set. The following table lists the UPS Character Sets.
	General Command Syntax
	DCS Ps ! u D … D ST
			UPS Character Sets
		Character Set		Ps	D…D
		DEC Supplemental		0	%5
		ISO Latin-1 Supplemental		1	A
		ISO Latin-Hebrew Supplemental		1	H
		DEC Technical		0	>
		ISO Latin-Greek Supplemental		1	F
		ISO Latin-9 Supplemental		1	b
	Decimal:		144 Ps ! u D … D ST
	Hex :		90 Ps 21 75 D…D 9C
	BASIC:		CHR$(144);Ps;”!u”;”D…D”;CHR$(156);

	NOTE
	If values for Ps and D…D are selected other than those in the
	table above, this command will be ignored.
DECBARC	Start Bar Coding: Generates bar codes using data that follows the
	sequence. Bar code parameters are defined by the last DECSBCA
	sequence. The printer continues to encode bar codes until it receives
	the Stop Bar Code sequence.
	General Command Syntax
	ESC % SP 0

Indeterminate Conditions

Bar codes that extend beyond the margins are truncated.

Decimal:	27 37 32 48
Hex:	1B 25 20 30
BASIC:	CHR$(27);”% 0“;

Chapter 7. Dec LG/Compaq LG Plus Emulation 170 GEK-00029B