Genicom GEK 00031B manual Decvec

DECVEC	Drawing Vectors: This sequence draws horizontal or vertical lines
	with length and width. Margins do not affect line drawing so you can
	draw lines to the physical limits of the page. Use the following Pn
	parameters to select the length, width, and direction of the line. An
	incorrect Pn value will cancel the entire sequence.

General Command Syntax

ESC [ Pn1 ; Pn2 ; … ; Pn5 ; !

P1: Define Line

0 = Draw a horizontal line to the right.

1 = Draw a vertical line down.

P2: Select the X Start Position

This parameter selects the horizontal start position on the page in decipoints.

P3: Select the Y Start Position

This parameter selects the vertical start position on the page in decipoints.

P4: Select the Line Length

Select the line length in the X direction for an X line. For a Y line, it specifies the Y direction length. A 0 value defaults to 1 decipoint.

P5: Select the Line Width

Select the line width for both X and Y lines. A 0 value defaults to 1 decipoint.

Decimal:	27 71 Pn1 59 Pn2 59 … 59 Pn5 59 33 96
Hex :	1B 5B Pn1 3B Pn2 3B … 3B Pn5 3B 21 7C
BASIC:	CHR$(27);”[“;Pn1;”;”;Pn2;”;”; … ;Pn5;”;”;”!”;

Chapter 7. Dec LG/Compaq LG Plus Emulation 194 GEK-00029B