THE BASIC CONNECTION

The basic connection below (TV and VCR) is the most common connection and is therefore used to illustrate a single component connection with your TV. For better sound and picture quality and

multiple component connection information refer to the next section, Advanced Connections.

Cables

You will use the following type of cable to make your connection:

Coaxial Cables: In this connection, two coaxial

cables are used: one connects from an antenna, cable, or cable box to the VCR, and one connects from the VCR to the TV. These cables carry both audio and video signals.

CABLE, CABLE BOX, OR ANTENNA

VCR I

OUT

EN

How to View the VCR

To watch the VCR in this connection tune TV to

Channel 3 or4.

Later, in the Interactive Setup section you will

program the TV to automatically tune to Channel 3 or 4 when you turn on the VCR.

Once you have completed this connection you may skip to Step 3, "Connect the G-LINK Cable."

5

Page 7
Image 7
RCA CRT Television manual Basic Connection, Cables, How to View the VCR