RCA CRT Television manual Using the WHO.INPUT Button

MENU Brings up the Main menu and selects highlighted items. When in VCR mode, it functions as a PROGRAM button.

CLEAR Removes any menu or display from the screen and returns you to TV viewing. Also exits the GUIDE Plus+ Gold menu system.

(0-9) Number Buttons Enters channel numbers, digits for programming the remote, and time settings directly though the remote control. To enter a two-digit channel, press the two digits. To enter a three-digit channel, press and hold the first digit, release, then add the second two. For example: to tune to channel 123, press and hold 1, release, press 2, then press 3.

WHO,INPUT In TV mode, press to toggle through the available input sources (VIDI/SVlD1, VID2/SVID2, current channel). In SAT mode, press to select available channel lists (RCA, GE, and PROSCAN only).

ANTENNA Functions as TV/VCR button in VCR mode and TV/receiver button in SAT.CABLE mode.

DVD VCR2 AUX SAC,CAbLE

_UTES_P

SOUND GO BACK

GUIDE

REVERSE, PLAY, FORWARD, REC,VCR+, STOP, PAUSE If programmed,

provides transport control for some remote-controllable VCRs, DVD players, laserdisc players, tape decks, and CD players. Pressing REC.VCR+ when using the GUIDE Plus+ system sets the VCR to record a program.

PiP Brings up the small pictureqn-picture window. Press again to remove the PIP window. If you have selected the option labelled Alternate with PIP while in the PIP Caption Display menu, then you will be able to toggle between PIP on, PIP with closed captioning, and

PIP off.	WHO'INPUT
	O©©©

SWAP Swaps the main picture with the PIP window.

CH CTRL Selects the picture window (that is, the main or PIP window) to be changed by the CH ^ (channel up), CH v (channel down), or WHO.INPUT buttons.

RESET Resets picture quality controls to the Bright Lighting Picture

Control Preset. Point and select to choose a different Picture Control

Preset. Also used to reset the settings in several menus, such as the

Parental Controls menu.

USING THE WHO.INPUT BUTTON

Use the WHO*INPUT button to toggle through the available input sources and view the component you have connected to the TV.

1.Press TV to place the remote in TV mode. Make sure that the component you want to view is turned on.

2.Press WHO,INPUT to tune to an available input source.

3.Continue to press WHO,INPUT to scroll through the input sources.

Modes of Operation

Because this universal remote can control several different components (DVD player, VCR, Cable Box, etc.), it uses operational

modes triggered by the component buttons. For example if you want the remote to control the TV, you would press the TV button to put the remote into TV mode before you could control the TV.

23