RCA CRT Television Plug in the TV, Place Batteries in Remote, Turn on the TV, Program TH E TV

STEP 4: PLUG IN THE TV

Plug the end of the power cord into the wall outlet, matching the wide blade of the plug with the wide slot in the outlet. Be sure to insert the plug completely.

STEP 5: PLACE BATTERIES IN REMOTE

Remove the battery compartment cover from the back of the remote.

Insert fresh batteries. Make sure that the polarities (+ and -) are aligned correctly.

Replace the cover.

STEP 6:TURN ON THE TV

Press TV on the remote, or press POWER on the TV itself.

Pressing the TV button not only turns on the TV, but puts the remote into TV mode, so that the buttons on the remote will control TV functions.

ON-SCREEN PROGRAM GUIDE

The TV is designed to bring up the GUIDE Plus+ Gold on-screen program guide when you use the TV button on the remote to turn on the TV (after you have set up the GUIDE Plus+ Gold system). For more information on setting up the GUIDE Plus+ Gold system, see the next section, Interactive Setup.

To get out of the GUIDE Plus+ Gold System:

•Press OK to exit the GUIDE Plus+ Gold system and tune to the highlighted channel.

•Press GUIDE to exit the GUIDE Plus+ Gold system and tune to the channel displayed in the View window.

•Press CLEAR to exit the GUIDE Plus+ Gold system and go to the last channel you were watching.

STEP 7: PROGRAM TH E TV

Proceed to the next section, Interactive Setup. The interactive setup routine walks you through the steps needed to fully configure the TV. The first steps ask you to select your preferred language for the menu system and to begin the auto channel search, which puts available cable TV or antenna signals into the TV'smemory.

Projection TV Only.

If the picture appears to have a double or

triple image or if you notice rings or halos

around objects, you may have to adjust the

color convergence. Details can be found under the Screen menu heading in the "Using the Menu System" section of this manual.

10