Uniden 9035+1, DECT Elite 9035, 9035+2 Resetting the Handset, When you have this, Problem Try

Troubleshooting	When you have this	• The incoming messages may be too long. Ask callers to leave a brief message.
	problem...	Try...
	The answering system
	doesn’t say what time	• Checking to see if you have set the time (see page 22).
	messages were recorded.
	Messages are incomplete.	• The memory may be full. Delete some or all of the saved messages (see page 48).
	I can’t hear base or handset	• Adjusting the speaker volume on the base or handset (see page 37).
	speaker during call screening
		• Checking to see if the call screen feature is set to on (see page 46).
	or message playback.
	I can’t access answering	• Checking to see if you are using the correct PIN number (see page 49).
	system from a remote	• Checking to see if the touch-tone phone you’re using can transmit the tone for at
	phone.	least two seconds. If it cannot, try using a different touch-tone phone.

Resetting the Handset

You may need to reset your handset in the following instances:

• You lose a handset and purchase a new one.

• You get the message Registration Failed when you try to register the handset.

• You are unable to register any handsets to the base.

• When you register new handsets to the base, the handset IDs do not match. (For example, the handset registers as “Handset #4” but you only have two handsets.)

• When you are instructed to by one of Uniden’s call center representatives.

. Select the base you want to de-register the handset from (see Selecting the Base on page 14).

2.Press and hold [] and [#] for more than five seconds. Select DEREGISTER HS.

3.Select the handset which you are operating, and then press [Select/menu].

55

DECT ELITE OM.indb 55

13/3/08 3:21:41 PM