Liquid Damage, Handset Base | Uniden 9035+2, 9035+1, DECT Elite 9035

Liquid Damage

Moisture and liquid can damage your cordless phone.

• If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal.

• If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base), follow the steps below:

	Handset	Base

. Remove the battery cover and leave it off for		. Disconnect the AC adapter from the base, cutting
	ventilation.	off electrical power.
2.	Disconnect the battery pack. Leave the battery	2. Disconnect the telephone cord from the base.
	cover off and the battery pack disconnected for at	3. Let dry for at least 3 days.
	least 3 days.	3. Let dry for at least 3 days.
	least 3 days.
3.	Once the handset is completely dry, reconnect the
	battery pack and the battery cover.
4.	Recharge the handset’s battery pack for 15 to 20
	hours before using.

IMPORTANT: You must unplug the telephone line while recharging the battery packs to avoid charge interruption.

CAUTION: DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven. After following these steps, if your cordless telephone does not work, please visit www.uniden.com.au for Australian models and www.uniden.co.nz for New Zealand models for customer support.

Troubleshooting

58

DECT ELITE OM.indb 58

13/3/08 3:21:42 PM

Image 59

Uniden 9035+2, 9035+1, DECT Elite 9035 manual Liquid Damage, Handset Base

Contents

Dect Elite Dect Elite 9035+1 Dect Elite 9035+2 Table of Contents Finding a Lost Handset Using Hold, Conference and Transfer Using Your PhoneUsing Caller ID, Call Waiting, and Redial Lists Adjusting the Ringer, Earpiece Speaker Volume Precautions Using the Answering SystemMaintenance Troubleshooting Welcome Choosing the Best Location Installing the Phone Installing the Battery To the charging cradle for multi-handset packs only Connecting the AC adapterTo the base Charging the Handset Telephone cord may not be connected Connecting to the Phone Line Testing the Connection NOW YOU are Ready to USE Your Phone Installing the Belt Clip Expanding Your Phone Adding accessory handsetsRegistering accessory handsets Registering the handset to another base Using Multiple Bases Selecting the base Getting to Know Your New Phone FeaturesAnswering system features Manual Conventions Terminology Used in this Manual Parts of the Handset Charge LED Key delete Parts of the Base+ key Key Standby During a call Using the InterfaceReading the Handset Display Using the Handset Menu Using the Four-way Function Key Entering Text from Your Handset Press Select/menu Basic SetupSetting the Day & Time Activating Personal Settings Name Tag InsertActivating the Key Touch Tone Creating Phonebook Entries Setting Up the Phonebook Assign a personal ring tone for this entry Personal Ring Finding a Phonebook Entry Deleting a Single Phonebook Entry Editing an Existing Phonebook EntryStoring Caller ID or Redial Numbers in the Phonebook Copying Phonebook Entries to Another Handset Deleting all Phonebook Entries . Press Select/menu Customizing Your HandsetsChanging the Handset Banner Selecting a Ringer Tone Color Scheme Activating AutoTalkActivating Any Key Answer Activating Handset Keypad Lock Adjusting the Display LCD ContrastWallpaper Using Your Phone Chain dialing from the phonebook Switching to the Handset Speakerphone During a CallMaking a Call from the Phonebook Making a Call from a Caller ID Record Using Caller ID, Call Waiting, and Redial ListsUsing the Caller ID List For New Zealand Model Using Call WaitingDeleting Caller ID Numbers For Australian Model Deleting a Redial Record Redialing a Number Muting the Ringer One call only Adjusting the Ringer, Earpiece and Speaker VolumeAdjusting the Ringer Volume Adjusting the Earpiece Volume Base Speaker Adjusting the Speaker VolumeAdjusting the Audio Tone Handset Speaker Conferencing Using Hold, Conference and TransferFinding a Lost Handset Placing a Call on Hold Flash or again Transferring a CallAnswering a transferred call Making an intercom Using Special FeaturesPrivacy Mode Using the Intercom Answering an intercom Muting the Microphone Installing the Optional Headset Selecting a Greeting Setting Up the Answering SystemRecording a Personal Greeting Deleting Your Personal Greeting Press Select/menu Setting the Number of RingsSetting the Record Time or Announce only Activating the Base Call Screen Activating the Message Alert On/off Using the Answering SystemTurning Your Answering System On and Off From the base From the handset Reviewing Messages Dialing in to your answering system Screening CallsTurning Off the Message Alert Tone Operating the Answering System While You Are Away from Home If you want to Press # then Battery life MaintenanceSpecifications Battery Information Battery replacement and handling Power FailuresLow battery alert Cleaning the charging contacts When you have this Try Problem TroubleshootingCommon Issues When you have this Try Problem Try Resetting the HandsetWhen you have this Resetting the Handset Without the Base Traveling Out of Range Changing the Line Mode for Multiple Extensions Handset Base Liquid Damage Important Safety Instructions PrecautionsRechargeable Nickel-Metal-Hydride Battery Warning Index Registering Resetting Wallpaper PIN Remote Operation Card Remote access away from home TaskKey Memo Memo ONE Year Limited Warranty Uniden Australia Pty Limited/Uniden New Zealand Limited