JVC KD-NX901 manual Cancelling the display Demonstration, Setting the clock

ENGLISH

Cancelling the display

demonstration

If no operations are done for about one minute, display demonstration starts (except when the Navigation System is in use).

[Initial: Interval]—see page 87.

1

2

3Select “Off.”

4Finish the procedure.

To activate the display demonstration

In step 3 above...

• Select “All Time” or “Interval.”

Setting the clock

The built-in clock is automatically adjusted by receiving the GPS signals. To obtain correct time information, it is required to set the local time.

•When the GPS signals are received first time after calibration (see page 11), the clock is automatically set to the Coordinated Universal Time (UTC).

Adjust the clock to your local time only after it has been set to UTC.

1

2Select “24H/12H,” then select

“24Hours” or “12Hours.”

3Select “Time,” then set the local time.

4Finish the procedure.

To check the local time when the power is turned off

14