JVC KD-NX901 General settings PSM, Basic procedure, Indications Selectable settings, reference

General settings — PSM

Basic procedure

3 Adjust the PSM item selected.

ENGLISH

You can change PSM (Preferred Setting Mode) items listed in the table that follows.

1	4	Repeat steps 2 and 3 to adjust the
		other PSM items if necessary.
2	5	Finish the procedure.
	Select a PSM item.

Ex.: When you select “Scroll”

Indications Selectable settings, [reference page]

Movie

Demo	Interval: [Initial]; Display demonstration is activated and shown in
Display demonstration	one-minute intervals.
	All Time: Display demonstration is activated.
	Off: Cancels, [14].
	• Display demonstration starts if no operation is done for about
	one minute.
KeyIn CFM	On: [Initial]; Power-on, power-off, source (or compass) animations
Key-in confirmation	are activated.
	Off: Cancels.

Clock

24H/12H

Clock system

Time

Time

12Hours O 24Hours, [14] [Initial: 24Hours]

Set the local time (in one-hour intervals).

It is not required to set the minute since it is automatically adjusted by referring to the received GPS signals.

[Initial: 00:00]

To be continued...

87