JVC KD-NX901 manual Receiver troubles, Fm/Am

ENGLISH

Receiver troubles

		Symptoms	Causes		Remedies
	• “Push Reset” appears		Something is blocking the	Remove the obstacle, then
		on the display, and the	control panel movement.	reset the receiver (see page 2).
		control panel movement is		• If this does not work,
		freezed.			check if the installation has
					been correctly done.
General
	•	Sound cannot be heard	The volume level is set to the	Adjust it to the optimum
		from the speakers.	minimum level.	level.
			Connections are incorrect.	Check the cords and
				connections.
	•	The receiver does not	The built-in microcomputer	Reset the receiver (see page
		work at all.	may have functioned	2).
			incorrectly due to noise, etc.
FM/AM	•	SSM automatic presetting	Signals are too weak.	Store stations manually.
		does not work.
	•	Static noise while listening	The antenna is not connected	Connect the antenna firmly.
		to the radio.	firmly.
	•	Disc cannot be	The DVD/CD player may	Eject the disc forcibly (see
		recognised—“No Disc,”	have functioned incorrectly.	page 4).
		“Loading Error,” or “Eject
		Error” flashes.
	• “REGION CODE		Disc with an incorrect	Insert a disc with a proper
		ERROR!” appears on the	Region Code is inserted.	Region Code (see page 6).
		monitor.
playback	•	DVD-R/RW or CD-R/RW	Disc is not finalized.	•	Insert a finalized disc.
		or CD-R/RW cannot be		•	for recording.
		cannot be played back.			Finalize the disc with the
	•	Tracks on the DVD-R/RW			component which you used
Disc		skipped.
	•	Disc can be neither played	The DVD/CD player may	Eject the disc forcibly (see
		back nor ejected.	have functioned incorrectly	page 2).
	•	Disc sound and picture are	You are driving on rough	Stop playback while driving
		sometimes interrupted.	roads.	on rough roads.
			Disc is scratched.	Change the disc.
			Connections are incorrect.	Check the cords and
				connections.

114