JVC KD-NX901 manual Playback operations

Models: KD-NX901

1 129
Download 129 pages 19.28 Kb
Page 106
Image 106

ENGLISH

when running in a zigzag line on a broad road

when starting your car shortly after starting the engine

when running for the first time after installing the unit

when changing tires or attaching chains on the tires

when tire slip occurs continuously and frequently

after running on areas other than a road (e.g. private lands or parking lots)

after running in underground or tower type parking lots

after rotating your car on a turntable

after frequent stops and starts in a congestion

when the accuracy of GPS is deteriorated intentionally

when running on a road constructed recently

The route calculated by the System is one of the possible routes to your destination. The route is not always the most appropriate one.

The following phenomena may occur even if the System is working correctly...

It may guide to a closed road.

It may guide to a route requiring U-turn.

It may not guide to your destination if there is only a narrow road or no road to your destination.

It may not avoid a congestion even if dynamic guidance is activated.

It may show a different road name.

It may not ask you to turn at a junction even if you need to.

It may give a guidance different from the actual road condition.

It may give an incorrect distance information.

Playback operations

Basic operations

There is a time limit for some operations. In this case, if no further operation is done for a certain period, the current operation is cancelled.

Turning on the power

By pressing SOURCE on the receiver, you can also turn on the power.

Selecting the sources

When no disc is loaded in the receiver, “DISC” cannot be selected.

Without connecting to the CD changer and DAB tuner, “CD-CH” and “DAB” cannot be selected.

Turning off the power

If you turn off the power while listening to a disc, disc play will start automatically, next time you turn on the power.

Tuner operations

Storing stations in memory

During SSM search...

All previously stored stations are erased and stations are stored newly.

Received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency).

When SSM is over, the station stored in No. 1 will be automatically tuned in.

When storing a station manually, a previously preset station is erased when a new station is stored in the same preset number.

TA Standby Reception and PTY Standby Reception will be cancelled temporarily in the following cases:

While recording a CD into the HDD.

While editing the HDD contents.

While copying the SD contents into the HDD.

If you want to know more about RDS, visit <http://www.rds.org.uk>.

106

Page 106
Image 106
JVC KD-NX901 manual Playback operations