ENGLISH | preference. |
| Adjusting the sound basic settings |
| You can adjust the sound characteristics to your |
| 1 |
2Adjust the selected item.
Adjusting fader and balance
Adjust
•F06:
•R06:
Adjust the
•L06:
•R06:
Adjusting subwoofer output
Select an appropriate cutoff frequency level according to the subwoofer connected.
•115 Hz/85 Hz/55 Hz
The frequencies higher than the selected level are cut off to the subwoofer.
Adjust the subwoofer output level.
•00 (min.) to 08 (max.)
You can also activate or deactivate the High Pass Filter (HPF) by pressing 3.
When it is activated, “H” is displayed in between the output level and the cutoff frequency. Lower frequency signals will be sent only to the subwoofer so that you can enjoy the low frequency effect (LFE) of the DVD software purely from the subwoofer.
Adjusting the input level of each source
This setting is required for each source except FM. Before making an adjustment, select an appropriate source for which you want to make an adjustment.
Once you have made an adjustment, it is memorized, and the volume level will automatically increase or decrease by adjusted level when you change the source.
Adjust to match the input level to the FM sound level.
•
•If you adjust it while recording a CD, the input level of the HDD will be adjusted.
86