27
Setup
Test Printing with Configuration Report Printouts
1/16/2014 ZD500 Series™ Thermal Transfer Printer User’s Guide P1062653-002 Rev. A
Test Printing with Configuration Report Printouts
Before you connect the printer to your computer, make sure that the printer is in proper
working order. You can do this by printing a configuration status report.
1. Make sure the media is properly loaded and the top cover of the printer is closed.
2. Press and hold CANCEL button while setting the printer power switch to on (I).
3. Hold CANCEL button down until the printer status light turns green for the first time and
release.
4. The Printer and Network Configuration Reports (below) will be printed a couple of
seconds after the printer’s display reports ‘PRINTER READY’.
If you cannot get these reports to print and you have checked your printer installation with this
document, then see the Troubleshooting section of the User’s Guide or the Zebra Website for
guidance.