71
Printer Configuration
Changing Printer Settings
1/16/2014 ZD500 Series™ Thermal Transfer Printer User’s Guide P1062653-002 Rev. A
SENSOR Menu
Table 12 • SENSOR Menu
Sensor Type Select the Media Sensor
Select the media sensor that is appropriate for the media that you are using. The
reflective sensor can be used with all media types. The transmissive sensor should be
used only for simple gap media.
Accepted values: •TRANSMISSIVE
•REFLECTIVE
Related ZPL command(s): ^JS
SGD command used: device.sensor_select
Printer web page: View and Modify Printer Settings > Media Setup
Label Sensor Set the Sensitivity of the Label Sensor
Important • This value is set during sensor calibration. Do not change this
setting unless you are told to do so by Zebra Technical Support or by an
authorized service technician.
Accepted values: 0 – 255
Related ZPL command(s): none
SGD command used: ezpl.label_sensor
Printer web page: View and Modify Printer Settings > Calibration
Take Label Set the Intensity of the Take Label LED
Important • This value is set during sensor calibration. Do not change this
setting unless you are told to do so by Zebra Technical Support or by an
authorized service technician.
Accepted values: 0 – 255
Related ZPL command(s): none
SGD command used: ezpl.take_label
Printer web page: View and Modify Printer Settings > Calibration