Introduction
Control Panel
8
P1062653-002 Rev. A ZD500 Series™ Thermal Transfer Printer User’s Guide 1/16/2014
Control Panel

The control panel indicates the printer’s operating status and allows the user to control

basic printer operation.

Add
12
6 5811 9 7
1
2
3
4
Figure 4 • ZD500 Series™ Control Panel
10
1STATUS light Shows the current status of the printer. For more information, see
Table1 on page 9.
2The PAUSE button starts or stops printer operation when pressed.
3The FEED button forces the printer to feed one blank label each time the button is pressed.
4The CANCEL button cancels print jobs when the printer is paused.
5The RIGHT ARROW button, which is active only in the menu system, navigates to the right
through the main menu and to previous items in sub-menus.
6The DOWN ARROW button changes the parameter values. Common uses are to decrease a value
or to scroll through choices.
7The SELECT () button operates as follows:
•When on the Home screen, pressing enters the menu system.
•When in the menu system, pressing accepts the values shown.
8The UP ARROW button changes the parameter values. Common uses are to increase a value or to
scroll through choices.
9The LEFT ARROW button, which is active only in the menu system, navigates to the left through
the main menu and to the next item in sub-menus.
10 RIGHT OPTION button These buttons execute the actions or commands shown directly above
them in the display.
11 LEFT OPTION button
12 The display shows the printer’s operating status and allows the user to navigate the menu system.