63
Printer Configuration
Changing Printer Settings
1/16/2014 ZD500 Series™ Thermal Transfer Printer User’s Guide P1062653-002 Rev. A
Channel View the Channel Value
This parameter retrieves the current WI-FI channel the printer is using.
Accepted values: N/A
Related ZPL command(s): none
SGD command used: wlan.essid
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
Wireless Setup
Signal View the Signal Value
This parameter returns the signal strength of the connection to the access point
as a percentage value between zero (not connected) and 100 (strongest signal). Values
below 40% represent a very poor signal and radio communication is not reliable.
Accepted values: N/A
Related ZPL command(s): none
SGD command used: wlan.signal_strength
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
Wireless Setup
IP Port View the IP Port Value
This printer setting refers to the wireless print server’s port number that the TCP print
service is listening on. Normal TCP communications from the host should be
directed to this port.
Accepted values: N/A
Related ZPL command(s): none
SGD command used: wlan.ip.port
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
Wireless Setup
IP Alternate Port View the IP Alternate Port Value
This command sets the port number of the alternate WLAN port.
Note - Print servers supporting this command will monitor both the primary port and
the alternate port for connections at the same time.
Accepted values: 32-character alphanumeric string (default 125)
Related ZPL command(s): none
SGD command used: wlan.ip.port_alternate
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
Wireless Setup
Table 9 • NETWORK Menu (Continued)