Zebra Technologies ZD500 - page 79

67
Printer Configuration
Changing Printer Settings
1/16/2014 ZD500 Series™ Thermal Transfer Printer User’s Guide P1062653-002 Rev. A
Programming
Position
If the desired programming position (read/write position) is not achieved through RFID
tag calibration, a value may be specified. See the Zebra RFID Programming Guide 3 for
more details.
Accepted values: F0 to Fxxx (where xxx is the label length in
millimeters or 999, whichever is less)
The printer feeds the label forward for the
specified distance and then begins
programming.
B0 to B30
The printer backfeeds the label for the
specified distance and then begins
programming. To account for the backfeed,
allow empty media liner to extend out of the
front of the printer when using a backward
programming position.
Related ZPL command(s): ^RS
SGD command used: rfid.position.program
Printer web page: View and Modify Printer Settings > RFID Setup
> PROGRAM POSITION
RFID Read
Power
If the desired read power is not achieved through RFID tag calibration, a value may be
specified.
Accepted values: 0 to 30
Related ZPL command(s): ^RW
SGD command used: rfid.reader_1.power.read
Printer web page: View and Modify Printer Settings > RFID Setup
> RFID READ PWR
RFID Write
Power
If the desired write power is not achieved through RFID tag calibration, a value may be
specified.
Accepted values: 0 to 30
Related ZPL command(s): ^RW
SGD command used: rfid.reader_1.power.write
Printer web page: View and Modify Printer Settings > RFID Setup
> RFID WRITE PWR
RFID Valid
Counter
Resets the RFID valid label counter to zero.
Accepted values: N/A
Related ZPL command(s): ~RO
SGD command used: odometer.rfid.valid_resettable
Printer web page: N/A
Table 10 • RFID Menu (Continued)