Setup
Bluetooth Option Configuration
44
P1062653-002 Rev. A ZD500 Series™ Thermal Transfer Printer User’s Guide 1/16/2014
9. The values set in the Authentication PIN field will vary depending on the Bluetooth
version of the master device. If the master uses BT v2.0 or older, enter a numeric value in
this field. You will be prompted to enter this same value on the master device to verify
pairing. Security Mode 2 or 3 in Advanced Settings should also be selected for PIN
paring.
10. If the master device uses BT v2.1 or newer, this setting has no effect. BT v2.1 and newer
uses Secure Simple Paring (SSP) which does not require the use of a PIN.
11. Clicking on the Advanced Settings button will display the Advanced Bluetooth Settings
window. For more information on Advanced Settings, refer to the Wired and Wireless
Print Server Guide.
12. Click Next to continue configuring your printer.
13. The SGD commands to properly configure your printer will be displayed. Click Next to
continue to the Send Data screen.
14. On the Send Data screen, you may click on the Printer that you want to immediately send
the commands to or you may click on the File button to save the commands to a file on
your computer that can be sent to one or more printers at a later time.
15. To send the commands to the printer, click on the Finish button and the printer will be
updated and then reboot. You may disconnect the USB interface from your printer now.
16. To complete the Bluetooth paring process, enable Bluetooth device discovery on your
master device and follow the directions provided with the master device.