57
Printer Configuration
Changing Printer Settings
1/16/2014 ZD500 Series™ Thermal Transfer Printer User’s Guide P1062653-002 Rev. A
LCD Contrast Change the contrast on the printer’s display.
Accepted values: 3 to 15
Related ZPL command(s): none
SGD command used: display.contrast
Printer web page: N/A
Idle Display Select the information shown on the printer’s display when the printer is idle.
Accepted values: •FW VERSION
•IP ADDRESS
•MM/DD/YY 24 HR
•M/DD/YY 12 HR
•DD/MM/YY 24 HR
•DD/MM/YY 12 HR
Related ZPL command(s): none
SGD command used: device.idle_display_format
Printer web page: N/A
Power-Up Action Set the Power-Up Action
Set the action for the printer to take during the power-up sequence.
•CALIBRATE adjusts sensor levels and thresholds, determines the label length, and
feeds the media to the next web.
•FEED—feeds the labels to the first registration point.
•LENGTH determines the label length using current sensor values, and feeds the
media to the next web.
•NO MOTION tells the printer not to move the media. You must manually ensure
that the web is positioned correctly, or press feed to position the next web.
•SHORT CAL sets the media and web thresholds without adjusting sensor gain,
determines the label length, and feeds the media to the next web.
Accepted values: •CALIBRATE
•FEED
•LENGTH
•NO MOTION
•SHORTCAL
Related ZPL command(s): ^MF
SGD command used: ezpl.power_up_action
Printer web page: View and Modify Printer Settings > Calibration
Table 8 • TOOLS MENU (Continued)