Printer Configuration
Changing Printer Settings
60
P1062653-002 Rev. A ZD500 Series™ Thermal Transfer Printer User’s Guide 1/16/2014
Communication
Diagnostics Mode
Use this diagnostics tool to cause the printer to output the hexadecimal values for all
data received by the printer.
For more information, see Communication Diagnostics Test onpage 139.
Accepted values: •DISABLED
•ENABLED
Related ZPL command(s): ~JD to enable, ~JE to disable
SGD command used: device.diagnostic_print
Control panel key(s): Hold PAUSE + FEED for 2 seconds when the
printer is in the Ready state.
Printer web page: N/A
Enable ZBI Zebra Basic Interpreter (ZBI2.0™) is a programming option that may be purchased for
your printer. If you would like to purchase this option, contact your Zebra reseller for
more information.
Accepted values: N/A
Related ZPL command(s): none
SGD command used: zbi.key (identifies if the ZBI 2.0 option is enabled
or disabled on the printer)
Printer web page: N/A
Run a ZBI
Program
If you have ZBI installed, you may choose to run a ZBI program that you have
downloaded to your printer.
Accepted values: N/A
Related ZPL command(s): ^JI, ~JI
SGD command used: zbi.control.run
Printer web page: Directory Listing
Stop a ZBI
Program
If your printer is running a ZBI program, you may stop that program.
Accepted values: N/A
Related ZPL command(s): ~JQ
SGD command used: zbi.control.terminate
Printer web page: Directory Listing
Table 8 • TOOLS MENU (Continued)