Zebra Technologies ZD500 - page 67

55
Printer Configuration
Changing Printer Settings
1/16/2014 ZD500 Series™ Thermal Transfer Printer User’s Guide P1062653-002 Rev. A
Maximum
Label Length
Set the maximum label length to a value that is at least 1.0 in. (25.4mm) greater than the
actual label length plus the interlabel gap. If you set the value to one that is smaller than the
label length, the printer assumes that continuous media is loaded, and the printer cannot
calibrate.
For example, if the label length is 6.0inches (152 mm) including the inter-label gap, set the
parameter for at least 7.0 inches (178 mm).
Accepted values: 0 to the maximum label length supported by the printer
Related ZPL command(s): ^ML
SGD command used: ezpl.label_length_max
Printer web page: View and Modify Printer Settings > Media Setup >
Maximum Length
Table 7 • SETTINGS Menu (Continued)
2
1Label length (including interlabel gap)
2Interlabel gap
3Set the maximum label length to approximately
thisvalue
13