Zebra Technologies ZD500 memory bank sizes, protocol bits, TID information, password status, read write

Printer Configuration
Changing Printer Settings
66
P1062653-002 Rev. A ZD500 Series™ Thermal Transfer Printer User’s Guide 1/16/2014
Read RFID Data Read and return the specified tag data from the RFID tag located over the RFID
antenna. No printer movement occurs while tag data is being read. The printhead can be
open or closed.
Accepted values: EPC = reads the first 128 bits of EPC data
memory bank sizes = reads the EPC, TID, and
USER memory banks sizes. Determines the
sizes of the EPC, TID, and USER memory
banks.
protocol bits = reads the protocol bits from the EPC
memory banks and converts that value to the
EPC size
TID information = reads the first 32 bits of the TID
(Tag ID)
password status = reads the tag’s access and kill
passwords
Related ZPL command(s): ^RF
SGD command used: rfid.tag.read.content
and
rfid.tag.read.execute
Printer web page: N/A
RFID Test During the RFID test, the printer attempts to read and write to a transponder. No printer
movement occurs with this test.
Note - Ensure that the RFID tag is positioned over the printer's RFID antenna.
Accepted values: quick = performs a read EPC test and a write EPC
test (using random data)
read = performs a read EPC test
write = performs a write EPC test (using random
data)
Related ZPL command(s): N/A
SGD command used: rfid.tag.test.content
and
rfid.tag.test.execute
Printer web page: N/A
Table 10 • RFID Menu (Continued)