Regency IG34-ULPG, IG34-NG, IG34-LPG installation manual LOG SET Installation

INSTALLATION

LOG SET INSTALLATION

Read the instructions below carefully and refer to the diagrams. If logs are broken do not use the unit until they are replaced. Broken logs can interfere with the pilot operation.

The gas log kit contains the following:

a) 02-43 Rear Log

b)02-45 Front Right Log

c)02-56 Middle Left Log

d)02-46 Left Top Log

e) 02-47 Center Log

f)02-48 Middle Right Log

g)02-44 Front Left Log

h)902-154 Embers

i)902-153 Rockwool

j)902-179/P Vermiculite

k)946-669 Platinum Embers

(supplied with packaged manual)

Vermiculite	Vermiculite	Vermiculite
and embers	and embers	and embers

3)Place Rear Log A)02-43 on the two pins on the rear log support.

A)02-43

Pins on Rear Log Support

The "02" refer numbers (i.e. 02-43) are

molded into the rear of each log.

Note: Install Optional Brick Panels prior to installing logs.

1)Carefully remove the logs from the box and unwrap them. The logs are fragile, handle with care - do not force into position.

2)Sprinkle the vermiculite around the fi rebox base. Take some of the embers (approx. 1/3 of the bag) and sprinkle over the vermiculite.

4)Place Front Right Log B)02-45 on the two pins as shown.

B)02-45

Regency IG34 Gas Inbuilt Fireplace 15