INSTALLATION
FACEPLATE AND DOOR FRAME INSTALLATION
1)Position faceplate on unit lining up screw holes on faceplate with screw holes on unit - secure with 4 screws.
2)Install lower screw below glass door - secure with 4 screws.
4)Push both bottom frame hinges down on the metal lip until they are fully seated.
5)Flip bottom louver up to close.
Note: Ensure that the fl anges on the sides of the fi rebox are on the outside, when installing the faceplate (see below).
6)Install the door frame by hooking the top fl ange over the top of the glass door.
Faceplate
Flange on fi rebox 
3)Fold down the 2 hinges on the bottom frame to a fl at position.
The bottom frame is installed with a friction fi t - the opening in the corner of each hinge slides over the metal lip located on the fl oor of the unit.
Note: Ensure the bottom frame is positioned properly before installing, by making sure there is equal spacing on either side.
Glass Door | Door Frame |
|
7)Lower the door frame gently into place.
8) To uninstall - reverse procedure.
Openings on hinge
Metal Lip
Completed Faceplate & Door Frame Installation
with Safety Screen
20 | Regency IG34 Gas Inbuilt Fireplace |
