6

Safety Instructions

USE CAUTION IN CARRYING OR

TRANSPORTING THE PROJECTOR

–Do not drop or bump the projector, otherwise damages or
malfunctions may result.
–When carrying a projector, use a suitable carrying case.
–Do not transport the projector by using a courier or transport
service in an unsuitable transport case. This may cause
damage to the projector. To transport the projector through
a courier or transport service, consult your dealer for more
information.
Moving the Projector
When moving the projector, replace the Lens Cover and
retract Adjustable Feet to prevent damage to the lens and
cabinet.
When the projector is not in use for an extended period, put it
into a case.
Do not tilt the projector more than 20
degrees above and below.
Do not point the projector up to
project an image.
Do not point the projector down to
project an image.
Do not put the projector on either
side to project an image.
Install the projector properly. Improper Installation may reduce
the lamp life and cause a fire hazard.
Installing the Projector in Proper Position
Openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from
overheating, and these openings must not be blocked or
covered.
CAUTION
Hot air is exhausted from the exhaust vent. When using or
installing the projector, the following precautions should be
taken.
– Do not put any flammable objects near the vent.
– Keep the exhaust vent at least 3’(1m) away from any
objects.
– Do not touch a peripheral part of the exhaust vent,
especially screws and metallic part. This area will become
hot while the projector is being used.
– Do not put anything on the projector. Objects put on the
cabinet will not only get damaged but also cause fire hazard
by heat.
Cooling fans are provided to cool down the projector. The
fans' running speed is changed according to the temperature
inside the projector.
Air Circulation
20˚
20˚
Air Intake Vent
Exhaust Vent
(Hot air exhaust)